Class 12 Physics

CBSE Class 12 Physics: Lens Maker Formula Derivation Step-by-Step (Ray Optics)

The lens maker formula derivation is an essential 5-mark ray optics proof that connects refractive index, radii of curvature, and focal length across two refracting surfaces to calculate the exact power of thin spherical lenses.

Every year in the CBSE Class 12 Physics board examination, Section D features a dedicated 5-mark derivation from Ray Optics and Optical Instruments (Chapter 9). Among these questions, deriving the lens maker's formula is consistently awarded the highest weightage. However, state board and CBSE examiners frequently deduct 1 to 2 marks because students overlook intermediate virtual object sign conventions or omit ray direction arrows in the ray diagram.

Key Formula Takeaway

$$\frac{1}{f} = (n - 1) \left( \frac{1}{R_1} - \frac{1}{R_2} \right)$$ where $n = \frac{n_2}{n_1}$ represents the refractive index of the lens material relative to the surrounding medium, while $R_1$ and $R_2$ are the radii of curvature of the first and second spherical surfaces.

What Is the Lens Maker Formula and Why Is It Used?

The lens maker formula is an optical governing equation that relates focal length, radii of curvature, and refractive indices to design specific lenses for target focal powers.

It is not merely a single-step geometry formula, but rather a compound relation established by considering consecutive refractions at two separate spherical interfaces bounding a denser medium. Optical manufacturers use this equation to grind lenses of predetermined focal lengths from raw optical glass blanks ($n \approx 1.5$) or high-index polycarbonates ($n \approx 1.67$). For high school physics students, mastering this formula demonstrates a deep understanding of refraction at curved surfaces and virtual object concepts. That derivation secures full marks.

What Are the Core Assumptions for Deriving the Lens Maker Formula?

Before writing the algebraic steps in your board answer sheet, you must state the four standard assumptions required by the CBSE marking scheme:

  1. Thin Lens Approximation: The thickness of the lens is negligibly small compared to its focal length, radii of curvature, and object/image distances ($t \to 0$).
  2. Small Aperture: The physical diameter of the lens surface is small compared to the radii of curvature.
  3. Paraxial Rays: The incident and refracted light rays make small angles with the principal axis, permitting the approximations $\sin \theta \approx \tan \theta \approx \theta$.
  4. Point Object: The luminous object is treated as a point source located on the principal axis.

How Does Refraction Occur at a Single Spherical Surface?

The foundation of the lens maker formula rests upon the fundamental single spherical interface refraction equation:

$$\frac{n_2}{v} - \frac{n_1}{u} = \frac{n_2 - n_1}{R}$$

Here, $n_1$ denotes the refractive index of the rarer medium from which light travels, $n_2$ represents the refractive index of the denser refracting medium, $u$ is the object distance, $v$ is the image distance, and $R$ is the radius of curvature. Let us apply this rule consecutively across both boundaries of a double convex lens.

Step-by-Step Derivation of the Lens Maker Formula

Consider a thin double convex lens having refractive index $n_2$ surrounded by a medium of refractive index $n_1$ (such that $n_2 > n_1$). The two spherical refracting surfaces are labelled $S_1$ (radius $R_1$, pole $P_1$) and $S_2$ (radius $R_2$, pole $P_2$). Because the lens is thin, we measure all optical distances from the common optical centre $C$.

Step 1: Refraction at the First Surface ($S_1$)

A point object $O$ is situated on the principal axis in the rarer medium ($n_1$). Light rays from $O$ hit the first curved interface $S_1$ with radius of curvature $R_1$. If the second interface were absent, these rays would converge to produce a real image at point $I_1$ at a distance $v_1$.

Applying the curved surface refraction formula:

$$\frac{n_2}{v_1} - \frac{n_1}{u} = \frac{n_2 - n_1}{R_1} \quad \text{--- (Equation 1)}$$

Step 2: Refraction at the Second Surface ($S_2$)

Before the light rays can converge at $I_1$, they encounter the second refracting boundary $S_2$ separating the lens medium ($n_2$) from the outer medium ($n_1$). Here, light travels from a denser medium ($n_2$) back into the rarer medium ($n_1$).

Crucially, $I_1$ serves as a virtual object for the second surface $S_2$. The distance of this virtual object is $+v_1$. Refraction at $S_2$ forms the final real image at point $I$ at a distance $v$.

Applying the spherical refraction equation from medium $n_2$ into medium $n_1$:

$$\frac{n_1}{v} - \frac{n_2}{v_1} = \frac{n_1 - n_2}{R_2}$$

Rewriting the right-hand numerator by factoring out a negative sign:

$$\frac{n_1}{v} - \frac{n_2}{v_1} = -\frac{n_2 - n_1}{R_2} \quad \text{--- (Equation 2)}$$

Step 3: Combining the Equations for Both Surfaces

Now, add Equation (1) and Equation (2) together:

$$\left( \frac{n_2}{v_1} - \frac{n_1}{u} \right) + \left( \frac{n_1}{v} - \frac{n_2}{v_1} \right) = \frac{n_2 - n_1}{R_1} - \frac{n_2 - n_1}{R_2}$$

Notice that the intermediate term $\frac{n_2}{v_1}$ cancels out completely:

$$\frac{n_1}{v} - \frac{n_1}{u} = (n_2 - n_1) \left( \frac{1}{R_1} - \frac{1}{R_2} \right)$$

Divide both sides of the equation by $n_1$:

$$\frac{1}{v} - \frac{1}{u} = \left( \frac{n_2}{n_1} - 1 \right) \left( \frac{1}{R_1} - \frac{1}{R_2} \right) \quad \text{--- (Equation 3)}$$

Setting the relative refractive index $n = \frac{n_2}{n_1}$:

$$\frac{1}{v} - \frac{1}{u} = (n - 1) \left( \frac{1}{R_1} - \frac{1}{R_2} \right)$$

Step 4: Imposing the Principal Focus Condition

By optical definition, when the object is at infinity ($u = -\infty$), incident rays are parallel to the principal axis and converge at the principal focus ($v = f$). Substituting these boundary values into Equation (3):

$$\frac{1}{f} - \frac{1}{-\infty} = (n - 1) \left( \frac{1}{R_1} - \frac{1}{R_2} \right)$$

Since $\frac{1}{\infty} = 0$, we arrive at the standard Lens Maker's Formula:

$$\frac{1}{f} = (n - 1) \left( \frac{1}{R_1} - \frac{1}{R_2} \right)$$

Cartesian Sign Conventions for Different Lens Geometries

Students must know how the signs of $R_1$ and $R_2$ change across various thin lenses. The table below outlines standard Cartesian sign rules:

Lens Type Surface 1 ($R_1$) Surface 2 ($R_2$) Focal Length ($f$) Optical Behaviour
Equiconvex Lens $+R$ $-R$ $f > 0$ (Positive) Converging in air ($f = \frac{R}{2(n-1)}$)
Equiconcave Lens $-R$ $+R$ $f < 0$ (Negative) Diverging in air ($f = -\frac{R}{2(n-1)}$)
Plano-Convex Lens $+R$ $\infty$ $f > 0$ (Positive) Converging ($f = \frac{R}{n-1}$)
Plano-Concave Lens $-R$ $\infty$ $f < 0$ (Negative) Diverging ($f = -\frac{R}{n-1}$)

What Happens When a Convex Lens Is Immersed in Liquid?

A classic CBSE higher-order thinking (HOTS) question asks what happens to the focal length and behaviour of a glass convex lens ($n_g = 1.5$) when immersed in various liquid media ($n_l$):

Condition Relative Index $\frac{n_g}{n_l}$ Focal Length Change Lens Behaviour
$n_l < n_g$ (e.g., Water $1.33$) Greater than 1 Focal length increases ($f_l \approx 4f_a$) Remains converging, but power decreases
$n_l = n_g$ (e.g., Glycerine blend) Equal to 1 $f \to \infty$ (Infinite) Behaves as a plane glass sheet; lens disappears
$n_l > n_g$ (e.g., $CS_2$ liquid $1.63$) Less than 1 Focal length becomes negative Nature inverts: convex lens acts as diverging

Common Mistakes to Avoid in CBSE Board Examinations

  • Omitting Ray Directions: If incident and refracted rays lack arrowhead directions on your ray diagram, examiners automatically deduct half a mark.
  • Misidentifying $I_1$ in Surface 2: Always explicitly write: "$I_1$ acts as a virtual object for the second refracting surface $S_2$." Skipping this pedagogical reasoning is the number one cause of step deductions.
  • Forgetting to State Assumptions: Write down thin lens and paraxial ray assumptions in bullet points before starting Step 1.

Verify Your Physics Derivations with PixVeda

Are you stuck on multi-step optics derivations or complex sign conventions in physics numericals? The PixVeda AI Study Assistant breaks down board exam derivations step-by-step. Simply upload your handwritten attempt on the PixVeda Web App or sign up for free to identify missing steps and verify your mathematical logic before exam day.

Frequently Asked Questions (FAQ)

What is the difference between the lens maker's formula and the thin lens formula?

The lens maker formula relates the focal length of a lens to its refractive index and surface radii of curvature ($\frac{1}{f} = (n - 1)(\frac{1}{R_1} - \frac{1}{R_2})$). In contrast, the thin lens formula relates object distance, image distance, and focal length ($\frac{1}{f} = \frac{1}{v} - \frac{1}{u}$).

Why does a convex lens immersed in carbon disulfide behave as a concave lens?

Carbon disulfide has a refractive index of approximately 1.63, which is higher than typical optical glass (1.5). Because the relative refractive index $(\frac{n_g}{n_l} - 1)$ becomes negative, the focal length turns negative, inverting the lens from converging to diverging.

Does the lens maker formula hold for thick lenses?

No. The standard lens maker formula assumes the thickness of the lens is negligible. For thick lenses, a thickness correction term ($+\frac{(n-1)d}{n R_1 R_2}$) must be incorporated into the focal length relation.

#Lens Maker Formula Derivation #Class 12 Physics Ray Optics #CBSE Board Exam Derivations #Refraction at Spherical Surfaces #NCERT Physics Class 12

Solve Doubts Faster with PixVeda AI

Don't get stuck on homework or board exam revisions. Upload notes, solve step-by-step, and generate mind maps instantly.

Start Free Today →